您所在的位置:首页 > 资讯 » 行业动态 »  led灯带的优势及适用范围,你都了解吗?

led灯带的优势及适用范围,你都了解吗?

  有0人浏览   日期:2019-09-07

文章摘要: 为什么led灯带的使用范围越来越广,我想这跟led灯带自身的优势是分不开的,那led灯带都有哪些优势呢?今天免费网站宣传平台的小编给大家详细的分享下!......

为什么led灯带的使用范围越来越广,我想这跟led灯带自身的优势是分不开的,那led灯带都有哪些优势呢?今天免费网站宣传平台的小编给大家详细的分享下!

Why is the use of LED light band wider and wider, I think this is inseparable from the advantages of LED light band itself, then what are the advantages of LED light band? Today's free website publicity platform for you to share in detail!

一、优势

I. Advantages

1、柔软,能像电线一样卷曲。

免费网站宣传平台

1. Soft and coiled like wires.

2、能够剪切和延接。

2. Ability to cut and extend.

3、灯泡与电路被完全包覆在柔性塑胶中,绝缘、防水性能好,使用安全。

3. The bulb and circuit are completely covered in flexible plastic, which has good insulation, waterproof performance and safe use.

4、耐气候性强。

4. Strong weather resistance.

5、不易破裂、使用寿命长。

5. It is not easy to break down and has a long service life.

6、节能。相比传统灯具功率要小很多。

6. Energy saving. Compared with traditional lamps, the power is much lower.

7、环保,制作材料都是环保材料。

7. Environmental protection, production materials are environmental protection materials.

免费网站宣传平台

8、安装简单方便.没有复杂的流程。

8. Installation is simple and convenient. There is no complicated process.

9、易于制作图形、文字等造型;已被广泛应用在建筑物、桥梁、道路、花园、庭院、地板、天花板、家具、汽车、池塘、水底、广告、招牌、标志等上装饰和照明。

9. Easy to make graphics, text and other shapes; has been widely used in buildings, bridges, roads, gardens, courtyards, floors, ceilings, furniture, automobiles, ponds, underwater, advertising, signs and other decoration and lighting.

二、 主要结构和适用范围

II. Main Structure and Scope of Application

LED灯条灯罩采用高导热铝型材,外观高档精美,光源使用进口芯片5050贴片LED。 适用于珠宝首饰、展示柜台、居家别墅照明,商场、酒店,写字楼休闲会所等照明场所,是代替传统荧光灯管的理想灯具。

The LED lamp shade is made of high thermal conductivity aluminium profiles with high-grade and exquisite appearance. The imported chip 5050 patch LED is used as the light source. Applicable to jewelry, display counters, home villas lighting, shopping malls, hotels, office leisure clubs and other lighting places, is an ideal lamp to replace traditional fluorescent lamps.

免费网站宣传平台

1、防静电:由于LED是静电迟钝部件,假如正在维修led灯带时没有做好防静电措施,就会烧坏LED,造成浪费。所以要求注意的是电烙铁必然要运用防静电烙铁,同时维修人员也必需做好防静电措施(如戴静电环和防静电手套等)。

1. Anti-static: Because the LED is a passive component of static electricity, if the anti-static measures are not taken when the LED lamp band is being repaired, it will burn the LED and cause waste. Therefore, it should be noted that electrostatic soldering iron must be used, while maintenance personnel must also do a good job of anti-static measures (such as wearing electrostatic rings and anti-static gloves).

2、延续低温:led灯带的两个主要组件是LED和FPC,都是没有能延续耐低温的产品。FPC假如正在延续低温或者超越其接受量度,就会使FPC的遮盖膜开裂,间接形成led灯带报废。同样,LED也没有能延续的耐受低温,正在低温工作下久了,其芯片会被低温烧坏。因而,维修led灯带时所采纳的电烙铁必然要采纳控温电烙铁,把量度限定在一度范畴内,禁止随意更改和设定。此外,即使如此,还需要留意正在维修时电烙铁有没有要在LED的脚位停止工作超过10秒,假如超过某个时间,就很容易烧坏LED芯片。

2. Continue low temperature: LED and FPC are the two main components of LED lamp belt. There are no products that can endure low temperature. If FPC is continuing low temperature or exceeding its acceptance measure, it will crack the covering film of FPC and indirectly form LED lamp band scrap. Likewise, the LED can not continue to withstand low temperatures. It has been working at low temperatures for a long time, and its chips will burn out at low temperatures. Therefore, the electric soldering iron adopted in the maintenance of LED lamp belts must adopt temperature control electric soldering iron, limit the measurement to a certain extent, and prohibit arbitrary changes and settings. In addition, even so, it is necessary to pay attention to whether the soldering iron should stop working at the foot of the LED for more than 10 seconds while it is being repaired. If it exceeds a certain time, it is easy to burn the LED chip.

免费网站宣传平台

3、短路:很多led灯带没有亮是由于脚位处有短路,正在维修前要调查真正的没有亮缘由。要不,贸然改换没有亮的LED以后,再次回电时还会接续形成该LED的芯片被短路直流电击穿。因为,正在改换新的LED事前,一定要先找到没有亮的真正缘由,有的放矢才能事倍功半。

3. Short Circuit: Many LED lamp belts are not lit because of short circuit at the foot. Before repairing, we should investigate the real reason why they are not lit. Otherwise, the chip that formed the LED will be broken down by short-circuit direct current when it is returned after changing the LED which is not bright. Because, before changing the new LED, we must first find the real reason for the lack of brightness. only when we have a definite goal can we get twice the result.

感谢您的阅读与观看,本文的精彩内容来自:免费网站宣传平台,我们会有更多的精彩内容继续为您呈现,详情请点击:http://www.lushangyun.com

Thank you for your reading and watching. The wonderful content of this article comes from: free website promotion platform. We will continue to show you more wonderful content. For more details, please click: http://www.lushangyun.com.


免责声明:
本网站部分内容来源于合作媒体、企业机构、网友提供和互联网的公开资料等,仅供参考。本网站对站内所有资讯的内容、观点保持中立,不对内容的准确性、可靠性或完整性提供任何明示或暗示的保证。如果有侵权等问题,请及时联系我们,我们将在收到通知后第一时间妥善处理该部分内容。

微信

关注鲁商云官方微信账号:“nuoshangxinxi”,每日获得互联网最前沿资讯,热点产品深度分析!

>> 关于“”的相关资讯

热点聚焦
嘿,我来帮您!
客服萍萍 | 客服茜茜